adhesive lined polyolefin heat shrinkable insulating tubes
Dual wall, flexible, flame retarded,
heat shrinkable tubing
Outer jacket: Polyolefin, inner liner: Adhesive
Adhesive lined heat shrinkable insulating tubes specifically designed to insulate, seal & protect parallel splices in automotive wiring harnesses and electronic assemblies
Seals and protects against water, moisture and chemicals
Adhesive bonds readily to PVC, XLPE cable jackets
Shrinks rapidly for quick installation, shrink temperature 110C
Materials : Co-extruded of polyolefin and hot melt adhesive
Application: Insulation, Sealing, Protect bundles wires and metal tubes against water or moisture
MIL-I-23053/4 Class 3 UL approved
|
Sizes |
I.D (min) As Supplied |
I.D (max) Recovery |
Wall thickness after full recovery (min) |
||
|
Total |
Tube |
Adhesive |
|||
|
Ø3.0/1.0 |
3.7 |
1.0 |
1.0 |
0.5 |
0.5 |
|
Ø4.0/1.3 |
4.7 |
1.3 |
1.2 |
0.6 |
0.6 |
|
Ø6.0/2.0 |
6.4 |
1.6 |
1.4 |
0.7 |
0.7 |
|
Ø6.0/1.5 |
6.4 |
1.4 |
1.5 |
0.7 |
0.8 |
|
Ø8.0/2.0 |
8.6 |
1.8 |
1.8 |
0.9 |
0.9 |
|
Ø 9.0/3.0 |
9.6 |
2.8 |
1.6 |
0.8 |
0.8 |
|
Ø 9.0/2.3 |
9.6 |
2.1 |
2.0 |
1.0 |
1.0 |
|
Ø12.0/4.0 |
12.4 |
3.8 |
1.8 |
0.9 |
0.9 |
|
Ø12.0/3.0 |
12.4 |
2.8 |
2.4 |
1.2 |
1.2 |
|
Ø15.0/5.0 |
15.8 |
4.8 |
2.0 |
1.0 |
1.0 |
|
Ø16.0/4.0 |
16.8 |
4.0 |
2.2 |
1.1 |
1.1 |
|
Ø18.0/6.0 |
19.0 |
5.8 |
2.2 |
1.1 |
1.1 |
|
Ø20.0/5.0 |
20.3 |
4.9 |
2.4 |
1.2 |
1.2 |
|
Ø24.0/8.0 |
24.6 |
7.8 |
2.4 |
1.2 |
1.2 |
|
Ø30.0/10.0 |
30.2 |
9.9 |
2.4 |
1.2 |
1.2 |
|
Ø32.0/8.0 |
32.0 |
8.0 |
2.5 |
1.2 |
1.3 |
|
Ø40.0/13.0 |
40.0 |
13.0 |
2.5 |
1.2 |
1.3 |
|
Property |
Test
Condition |
Quality
Index |
Test
Data |
|
Tensile
Strength |
|
>=10.4M
Pa |
13M
Pa |
|
Elongation |
|
>=200% |
450% |
|
Aging
Tensile Strength |
158°C
/168hours |
holding
70% |
12M
Pa |
|
Aging
Elongation |
158°C
/168hours |
holding
70% |
400% |
|
Dielectric
Strength |
AC
2500V/60Sec |
Pass |
Pass |
|
Volume
Resistivity |
|
>=1014ohm-cm |
>1015ohm-cm |
|
Copper
Corrosion |
158°C
/168hours |
No
Corrosion |
Pass |
|
Copper
Stability |
158°C
/168hours |
Elongation>=100% |
200% |
|
Flammability |
VW-1
(except clear) |
Pass |
Pass |
|
Adhesive
Intenerate Temp |
|
|
86°C |
|
Adhesive
Remove Strength |
|
|
>=50N/cm |
|
Adhesive
Cutting Strength |
|
|
>=7.2M
Pa |